Product Overview
The Dead Air Mojave Piston 1/2×28 9mm is a suppressor-support component intended for a specific mounting, attachment, alignment, service, or configuration role. Suppressor accessories are highly system-specific, so the suppressor model, host firearm, barrel thread pattern, mounting standard, caliber, and manufacturer part number should all be confirmed before purchase.
Key Features and Specifications
- Product Type: Suppressor Piston
- Thread Pattern: 1/2×28
- Caliber or Bore: 9mm
Why These Features Matter
Product Type: Suppressor Piston
Correct identification matters because pistons, boosters, fixed mounts, front caps, muzzle devices, spacers, and adapters perform different jobs.
Thread Pattern: 1/2×28
Thread pitch and direction must match exactly. An incorrect pattern can damage the barrel, mount, or suppressor and can create an alignment hazard.
Caliber or Bore: 9mm
Caliber or bore clearance must support the intended cartridge and projectile diameter.
Choosing Pistol Pistons, Boosters, and Fixed-Barrel Components
A tilting-barrel semiautomatic pistol commonly requires a compatible piston and booster assembly so the firearm can cycle with the suppressor attached.
Fixed-barrel hosts do not use the booster in the same way. Depending on the suppressor system, a fixed mount or fixed-barrel spacer may be required instead.
Match the piston thread pattern to the host barrel and verify that the piston, booster housing, spring, and suppressor model are approved to work together.
Do not substitute a fixed-barrel spacer for a piston or use a booster configuration on an unsupported host. Follow the suppressor manufacturer chart.
Installation, Alignment, and Maintenance
Unload the firearm completely before installation or inspection. Follow both the firearm and suppressor manufacturer instructions.
Clean the barrel threads and mating surfaces, then install the component using the specified torque, shims, timing method, and thread treatment. Do not improvise with crush washers unless the manufacturer expressly permits them.
Verify suppressor alignment with the correct equipment before firing, especially after changing mounts, muzzle devices, adapters, front caps, or host firearms.
Inspect threads, tapers, locking surfaces, pistons, springs, caps, mounts, and fasteners for carbon buildup, wear, deformation, looseness, or damage. Replace any component that no longer locks or aligns correctly.
Best For
- Owners matching an accessory to the exact suppressor and host-firearm system
- Direct-thread, QD, HUB, piston, booster, 3-lug, or muzzle-device configurations identified by the manufacturer
- Users who will verify thread pitch, caliber, alignment, torque, and installation requirements
TRA Take
For pistol suppressor setups, the operating system matters as much as thread pitch. A correct piston with the wrong booster or host type is still the wrong configuration.
Frequently Asked Questions
What type of suppressor accessory is this?
This product is classified as a suppressor piston based on the catalog information.
What thread pattern does it use?
The listed thread pattern is 1/2×28. Confirm thread diameter, pitch, direction, and barrel shoulder requirements.
What caliber or bore is listed?
The catalog lists 9mm. Confirm the complete suppressor and host-firearm configuration supports the intended cartridge.
Is this accessory an NFA-regulated suppressor?
No. This listing is for an accessory or mounting component, not a serialized suppressor. Standard non-serialized accessories generally ship directly where legal.
Is professional installation recommended?
Professional installation or inspection is recommended whenever the part affects muzzle-device timing, suppressor alignment, mounting security, barrel threads, or safe projectile clearance.
How should alignment be checked?
Follow the suppressor manufacturer procedure and use appropriate alignment equipment before firing, especially after changing mounts, adapters, muzzle devices, caps, or host firearms.
Can similar-looking mounts be substituted?
No. Similar appearance does not confirm compatible dimensions, thread pitch, locking geometry, or caliber clearance. Use only manufacturer-approved combinations.
What is the manufacturer part number?
The manufacturer part number is PB440.
Shipping and Installation Information
This listing is for a non-serialized suppressor accessory and generally ships directly where legal. It is not a suppressor and does not itself require an NFA transfer. Some muzzle devices, adapters, tools, or components may be restricted by destination or intended configuration. Confirm lawful use and follow all manufacturer installation, torque, timing, alignment, cleaning, and inspection instructions.
Complete The Setup
Once you choose the primary item, finish the setup with the supporting gear most buyers need anyway—so the purchase is ready to use and you can get it here in one place.
- Compatibility: Confirm firearm model, light, optic, or belt system before checkout.
- Supporting gear: Belts, magazines, optics, and lights often complete the same setup.
- Safe storage: If this accessory is part of a home or carry system, confirm storage and access plans too.
Sales Policy
All sales are final. Please review our Terms and Conditions and Refund and Returns Policy before you order.
Credova Financing
Qualified customers may finance eligible orders of $700 or more through Credova. The $700+ total can include firearms, accessories, ammunition, and other eligible items in the same order. Approval and terms are provided by Credova.
If your cart total will reach $700, you can review Credova prequalification at checkout.
Why Buy From Tar River Arms
- Veteran-owned licensed firearms dealer
- Clear product education focused on the real buying decision
- Competitive pricing with guidance you can trust
- Secure online checkout
- Nationwide shipping where legal
- Orders reviewed for destination legality before they ship
- Local pickup available in Raleigh, North Carolina — call ahead to confirm timing
- Gunsmithing and product-support experience when you need help finishing the setup
Product Identification
Manufacturer Part Number: PB440
UPC: 810128161886
Use these identifiers to distinguish this configuration from similar mounts, adapters, pistons, caps, and muzzle devices.



